Cart 0
Window Covers: Ford Transit Van Medium/High Roof

Window Covers: Ford Transit Van Medium/High Roof

$ 1.00

Our current production time is about 3-5 weeks.

*Fabric Change (as of 12/7/2020), we now have a new fabric with colors: Nickel, Camel, Smoke and Asphalt. Please see the sample photos. Actual photos of the covers have not been updated site-wide.

Made to add privacy while camping and to help regulate the temperature inside your van. Using a water-resistant polyester fabric (will not trap condensation like natural fibers will), Low-E insulation (aluminum creates a thermal barrier) and high quality rare neodymium magnets, these insulated window covers create a clean and stealth appearance. All covers are magnetic (besides the windshield) and install in seconds. They will not move or fall down, even if the door is slammed. Now offering four color choices. Black fabric always faces out, but you choose in the interior-facing color. The insulation we use allows us to keep the black fabric on the exterior, you can read about the insulation below.

Handcrafted in Santa Cruz, Ca, by us, not outsourced. All sales are generally produced in the order that they're received, but we often make small batches of similar orders. Full-Kits are about 6 weeks out, but smaller orders might get sewn in a batch and turned out sooner. Storage bags are included on all orders. 

Colors: Fabric swatches are free, just email us your shipping address.

Nickel: Very light grey.

Camel:  Nice and warm tan.

Smoke: Dark charcoal grey with an evergreen hue.

Asphalt: Black.

 "Full Kit": Cargo van only, not passenger wagons. Includes the Windshield, Front Doors, Slider Door, and Rear Doors. Additional Items: Fan Covers, Half-sliders and the Flip-Up Vent option are additional features and are not included in the Full Kit. Please leave a note at checkout if you do not have a rear view mirror OR select the add-on

"Crew Van Kit": This is for the new factory "crew" setup from Ford. Kit includes Windshield, Front Doors, Slider and opposing Crew window and the rear doors. The slider and crew windows have plastic trim, but we will send our adhesive steel to add to the edges of the glass. Send us an email with any questions. 

Fan Covers, Half-Sliders and Awning-style: They all come with instructions to install thin steel strips on the backside of the fan trim piece via 3M VHB clear adhesive tape. They do not interfere with the trim piece sitting flush against any roof surface. The covers have eight large magnets sewn in and attach to the outside of the plastic trim. Will fit both Maxxair and Fantastic Fans. Half-Sliders: We make them for the CRL 10x33", Motion 10x36", and Hehr (RB Components) 10x36" windows. Awning-style CRL 10x33"+ windows are now available (the bottom tips out as opposed to the half sliders that slide horizontally). They too need the steel strips added in between the screw heads on the aluminum frame. We will send the steel strips backed with the VHB tape. You will need a pair of tin-snips or strapping cutters to easily trim the steel strips to fit in between the screw heads. The covers can also be left in place and folded forward in half to access the vented portion (they are held in half magnetically).

CRL Vented Windows: If you have a CR Laurence T-Vent window installed we make a partial flip-up section that allows the vent to be accessed with the top 2/3's of the cover in place over the glass (slider and "crew" only). If you have the CRL slider door T-Vent, simply add the "Flip-Up for Vent: Slider Door" option to your order. If you have the CRL T-Vent on the "Driver Side Forward Window" position (we refer to as: "CRL Crew Window"), select the "CRL Crew Window" option. *Note: If you have any tweed or fabric covering the metal up to aluminum frame, please leave a note at checkout because they require stronger magnets.  If your "Crew Window" is boxed in with custom wall paneling (wall paneling up against the aluminum frame), leave a note at checkout. We can make a cover to fit the frame and send steel strips, like the Half-Sliders. 

*Made for North American Ford Transit Cargo Vans, not the Passenger Wagons with plastic trim. 

*Low-roof Transit cargo vans and Mid/High roof cargo vans with "All-Around Glass" (no plastic trim): We have all the patterns. Email us because there are so many different configurations, it's too much to list on the webstore. We've made many and have the patterns ready.

Storage: Stitch lines are horizontal on the rear doors so you can fold them partially down. All other windows have vertical stitch lines for support and to decrease their size when stowing away. A set of front doors, slider and rear doors fold down to a bag that is roughly 8"W x 30"H x 5"D. 

Fabric: Polyester fabric that is UV stable and will not fade in the sunlight. Urethane coating gives water resistance and paired with the Low-E, the covers will not trap condensation. No mold or rot like natural fibers will (mudcloth, cotton, or duck canvas).

Low-E insulation: USA-made, mold-proof and waterproof, light weight, non-toxic, no fiberglass, great thermal performance and manufactured using a polyethylene foam core with reinforced double sided aluminum facings. Creates an excellent thermal barrier. 

Rare earth magnets: We use high quality grade 42 nickel-plated rare earth block magnets that have a pull strength of over 6 pounds each. We use around 30 magnets in a set of rear door covers. They are very powerful. 




Share this Product

More from this collection